Product Video
Product Introduction
1.This is a fully automatic device integrating multiple functions. It can perform crimping at both ends or at a single end, and single-end tin dipping. The wire twisting function can be added, and customization is supported.
2.It is controlled by a single-chip microcomputer, and multiple values can be set. There is a fault alarm system that can display problems in real time.
3.As an integrated high-quality device, it achieves higher-speed operation. It has a compact structure and an exquisite design, occupying less space.
4.With a modular design, each functional module can be freely enabled or disabled in the program, enabling quick replacement, upgrading, and maintenance. For different wire harnesses, it can operate efficiently by replacing components.
Product Function
| Equipment Name and Model： | GL – 201A Fully Automatic Double – End Flat Cable Terminal Crimping Machine |
| Main Functions： | At end A: cutting, stripping, and crimping terminals. At end B: stripping, crimping terminals (twisting wires and tin – dipping are optional). Capable of both forward and reverse crimping, as well as interval crimping. |
| Control Method： | Human – machine interface + microcomputer for machine adjustment |
| Detection Devices： | Detection of the presence or absence of terminals, alarm for wire shortage, and air pressure detection |
| Terminal Pressure Detection System： | Optional installation (by Guanju) |
| Terminal Crimping Capacity： | 2T ultra – quiet variable – frequency terminal machine |
Product parameter
| Power Supply: | 50/60HZ, 220V single-phase |
| Cutting Length： | 30mm – 1000mm (single – end terminal crimping) 60mm – 1000mm (double – end terminal crimping) |
| Wire Processing Range： | OD0.7 – OD2.0, 2P – 14P, subject to the size of the wire |
| Production Capacity： | “When the length is 300mm: The production capacity for 6PIN – 12PIN is approximately: 630 – 750 times/H * number of PINs * 2. For other lengths, it shall be subject to the actual production measurement of the wire.” |
| Stripping and Twisting Length： | End A: 0 – 7mm，End B: 0 – 7mm (Optional installation for 7 – 15mm) |
| Cutting Precision: | ±(0.2%*L+1)mm |
| Air Pressure: | 0.5 – 0.7Mpa (5 – 7KG/m³) |
| External Dimensions: | 1400*800*1500mm. Dimensions of the supporting wire pay-off rack: 920*560*1300mm |
| Weight: | Approximately 450KG±15KG. The weight of the supporting wire pay-off rack is approximately 80KG |
Related Casese
Auxiliary Expansion Device
